Home / Cylindrical Roller Bearings / Angle Rings For Cylindrical Roller Bearings

Angle Rings For Cylindrical Roller Bearings

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part NumberIDODWidthSystem of MeasurementOuter Dia Tolerance
HJ 2220 EC 100 mm 127.35 mm 16 mm Metric -0.035mm to 0
HJ 220 EC 100 mm 127.35 mm 15 mm Metric -0.035mm to 0
HJ 319 EC 95 mm 132.1 mm 20.5 mm Metric -0.035mm to 0
HJ 2319 EC 95 mm 132.1 mm 24.5 mm Metric -0.035mm to 0
HJ 219 EC 95 mm 120.5 mm 14 mm Metric -0.035mm to 0
HJ 318 EC 90 mm 124.05 mm 18.5 mm Metric -0.035mm to 0
HJ 2318 EC 90 mm 124 mm 22 mm Metric -0.035mm to 0
HJ 218 EC 90 mm 114.3 mm 14 mm Metric -0.035mm to 0
HJ 2317 EC 85 mm 117 mm 22 mm Metric -0.035mm to 0
HJ 217 EC 85 mm 107.5 mm 12.5 mm Metric -0.035mm to 0
HJ 416 80 mm 122 mm 22 mm Metric -0.035mm to 0
HJ 316 EC 80 mm 110.45 mm 17 mm Metric -0.035mm to 0
HJ 2316 EC 80 mm 110.45 mm 20 mm Metric -0.035mm to 0
HJ 216 EC 80 mm 101.55 mm 12.5 mm Metric -0.035mm to 0
HJ 415 75 mm 116 mm 21.5 mm Metric -0.035mm to 0
HJ 315 EC 75 mm 104.15 mm 16.5 mm Metric -0.035mm to 0
HJ 2315 EC 75 mm 104.15 mm 19.5 mm Metric -0.035mm to 0
HJ 215 EC 75 mm 94.4 mm 11 mm Metric -0.035mm to 0
HJ 414 70 mm 110 mm 20 mm Metric -0.035mm to 0
HJ 2314 EC 70 mm 97.4 mm 18.5 mm Metric -0.035mm to 0
HJ 214 EC 70 mm 89.4 mm 11 mm Metric -0.035mm to 0
HJ 413 65 mm 98.5 mm 18 mm Metric -0.035mm to 0
HJ 313 EC 65 mm 90.55 mm 15.5 mm Metric -0.035mm to 0
HJ 2313 EC 65 mm 90.65 mm 18 mm Metric -0.035mm to 0
HJ 2213 EC 65 mm 84.4 mm 10.5 mm Metric -0.035mm to 0
HJ 213 EC 65 mm 84.4 mm 10 mm Metric -0.035mm to 0
HJ 312 EC 60 mm 84.35 mm 14.5 mm Metric -0.035mm to 0
HJ 212 EC 60 mm 77.55 mm 10 mm Metric -0.035mm to 0
HJ 311 EC 55 mm 77.5 mm 14 mm Metric -0.035mm to 0
HJ 2311 EC 55 mm 77.5 mm 15.5 mm Metric -0.035mm to 0
Page   Previous Next
en_USEnglish