Angle Rings For Cylindrical Roller Bearings

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part Number	ID	OD	Width	System of Measurement	Outer Dia Tolerance
HJ 424	120 mm	187.6 mm	30.5 mm	Metric	-0.035mm to 0
HJ 2226 EC	130 mm	164.1 mm	21 mm	Metric	-0.035mm to 0
HJ 226 EC	130 mm	164.1 mm	17 mm	Metric	-0.035mm to 0
HJ 2326 EC	130 mm	182 mm	28 mm	Metric	-0.035mm to 0
HJ 326 EC	130 mm	182 mm	23 mm	Metric	-0.035mm to 0
HJ 2228 EC	140 mm	179.6 mm	23 mm	Metric	-0.035mm to 0
HJ 2328 EC	140 mm	195.6 mm	31 mm	Metric	-0.035mm to 0
HJ 328 EC	140 mm	195.6 mm	25 mm	Metric	-0.035mm to 0
HJ 2230 EC	150 mm	194.8 mm	24.5 mm	Metric	-0.035mm to 0
HJ 230 EC	150 mm	193.3 mm	19.5 mm	Metric	-0.035mm to 0
HJ 330 EC	150 mm	209.8 mm	25 mm	Metric	-0.035mm to 0
HJ 2232 EC	160 mm	205.85 mm	24.5 mm	Metric	-0.035mm to 0
HJ 232 EC	160 mm	207 mm	20 mm	Metric	-0.035mm to 0
HJ 1034	170 mm	201.35 mm	21 mm	Metric	-0.035mm to 0
HJ 234 EC	170 mm	220 mm	20 mm	Metric	-0.035mm to 0
HJ 1036	180 mm	215 mm	22.5 mm	Metric	-0.035mm to 0
HJ 2236 EC	180 mm	229.3 mm	24 mm	Metric	-0.035mm to 0
HJ 236 EC	180 mm	230.45 mm	20 mm	Metric	-0.035mm to 0
HJ 1038	190 mm	225 mm	22.5 mm	Metric	-0.035mm to 0
HJ 238 EC	190 mm	244.2 mm	21.5 mm	Metric	-0.035mm to 0
HJ 1040	200 mm	239.4 mm	25.5 mm	Metric	-0.035mm to 0
HJ 240 EC	200 mm	257.9 mm	23 mm	Metric	-0.035mm to 0
HJ 1044	220 mm	262 mm	27 mm	Metric	-0.035mm to 0
HJ 344	220 mm	304.8 mm	36 mm	Metric	-0.035mm to 0
HJ 1048	240 mm	282 mm	27 mm	Metric	-0.035mm to 0
HJ 2248	240 mm	311.8 mm	38.5 mm	Metric	-0.035mm to 0
HJ 252	260 mm	340 mm	33 mm	Metric	-0.035mm to 0
HJ 1056	280 mm	329.05 mm	31.5 mm	Metric	-0.035mm to 0
HJ 2256 EC	280 mm	355.2 mm	35.5 mm	Metric	-0.035mm to 0
HJ 1060	300 mm	356 mm	36 mm	Metric	-0.035mm to 0

Page Previous Next