Double Row Full Complement Cylindrical Roller Bearings

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part Number	ID	OD	Width	Dynamic Load	Static Load
NNC 4856 CV	280 mm	350 mm	69 mm	737 kN	1860 kN
NNCF 4856 CV	280 mm	350 mm	69 mm	737 kN	1860 kN
NNCF 4956 CV	280 mm	380 mm	100 mm	1210 kN	2700 kN
NNCF 5056 CV	280 mm	420 mm	190 mm	2920 kN	5300 kN
NNCL 4856 CV	280 mm	350 mm	69 mm	737 kN	1860 kN
NNCL 4956 CV	280 mm	380 mm	100 mm	1210 kN	2700 kN
NNF 5056 B-2LS	280 mm	420 mm	190 mm	2550 kN	5000 kN
NNC 4860 CV	300 mm	380 mm	80 mm	858 kN	2120 kN
NNC 4960 CV	300 mm	420 mm	118 mm	1680 kN	3750 kN
NNCF 4860 CV	300 mm	380 mm	80 mm	858 kN	2120 kN
NNCF 4960 CV	300 mm	420 mm	118 mm	1680 kN	3750 kN
NNCF 5060 CV	300 mm	460 mm	218 mm	3520 kN	6550 kN
NNCL 4860 CV	300 mm	380 mm	80 mm	858 kN	2120 kN
NNCL 4960 CV	300 mm	420 mm	118 mm	1680 kN	3750 kN
NNC 4864 CV	320 mm	400 mm	80 mm	897 kN	2280 kN
NNCF 4864 CV	320 mm	400 mm	80 mm	897 kN	2280 kN
NNCF 4964 CV	320 mm	440 mm	118 mm	1760 kN	4050 kN
NNCF 5064 CV	320 mm	480 mm	218 mm	3690 kN	6950 kN
NNCL 4864 CV	320 mm	400 mm	80 mm	897 kN	2280 kN
NNCL 4964 CV	320 mm	440 mm	118 mm	1760 kN	4050 kN
NNC 4868 CV	340 mm	420 mm	80 mm	913 kN	2400 kN
NNCF 4868 CV	340 mm	420 mm	80 mm	913 kN	2400 kN
NNCF 4968 CV	340 mm	460 mm	118 mm	1790 kN	4250 kN
NNCF 5068 CV	340 mm	520 mm	243 mm	4400 kN	8300 kN
NNCL 4868 CV	340 mm	420 mm	80 mm	913 kN	2400 kN
NNCL 4968 CV	340 mm	460 mm	118 mm	1790 kN	4250 kN
NNCF 4872 CV	360 mm	440 mm	80 mm	935 kN	2550 kN
NNCF 4972 CV	360 mm	480 mm	118 mm	1830 kN	4500 kN
NNCF 5072 CV	360 mm	540 mm	243 mm	4180 kN	8650 kN
NNCL 4872 CV	360 mm	440 mm	80 mm	935 kN	2550 kN

Page Previous Next