Radial Spherical Plain Bearings

The joint bearing is a spherical sliding bearing. Its sliding contact surface is an inner spherical surface and an outer spherical surface. It can rotate and swing at any angle when moving. The joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self-alignment, good lubrication, etc.

FILTERS

Product Number

GE 10 C(1)

GE 10 E(1)

GE 12 C(1)

GE 12 E(1)

GE 12 TXGR(1)

GE 15 C(1)

GE 15 ES(1)

GE 15 ES-2RS(1)

GE 4 C(1)

GE 4 E(1)

GE 5 E(1)

GE 6 C(1)

GE 6 E(1)

GE 8 C(1)

GE 8 E(1)

GEG 12 ESA(1)

GEH 10 C(1)

GEH 12 C(1)

GEZ 412 ESX-2LS(1)

GEZ 500 ES(1)

GEZ 500 ES-2RS(1)

GEZ 500 ESX-2LS(1)

GEZ 500 TXA-2LS(1)

GEZ 600 ES(1)

GEZ 600 ES-2RS(1)

GEZ 600 ESX-2LS(1)

GEZH 408 ES(1)

GEZH 408 ES-2RS(1)

GEZH 508 ES-2RS(1)

GEZH 508 ESX-2LS(1)

Part Number	Shield Type	ID	OD	Width	Outer Ring Width	Tilt Angle	Ring Material
GEZH 408 ES	Open	4.5"	7.75"	4.69"	3.75"	9°	Steel
GEZH 408 ES-2RS	Double-Lip Seals	4.5"	7.75"	4.69"	3.75"	9°	Steel
GEZ 412 ESX-2LS	Triple-Lip Seals	4.75"	7.375"	4.156"	3.562"	6°	Steel
GEZ 500 ES	Open	5"	7.75"	4.375"	3.75"	6°	Steel
GEZ 500 ES-2RS	Double-Lip Seals	5"	7.75"	4.375"	3.75"	6°	Steel
GEZ 500 ESX-2LS	Triple-Lip Seals	5"	7.75"	4.375"	3.75"	6°	Steel
GEZ 500 TXA-2LS	Triple-Lip Seals	5"	7.75"	4.375"	3.75"	6°	Steel
GEZH 508 ES-2RS	Double-Lip Seals	5.5"	8.75"	4.95"	4.125"	7°	Steel
GEZH 508 ESX-2LS	Triple-Lip Seals	5.5"	8.75"	4.95"	4.125"	7°	Steel
GEZ 600 ES	Open	6"	8.75"	4.75"	4.125"	5°	Steel
GEZ 600 ES-2RS	Double-Lip Seals	6"	8.75"	4.75"	4.125"	5°	Steel
GEZ 600 ESX-2LS	Triple-Lip Seals	6"	8.75"	4.75"	4.125"	5°	Steel
GE 4 C	Open	4 mm	12 mm	5 mm	3 mm	16°	Steel
GE 4 E	Open	4 mm	12 mm	5 mm	3 mm	16°	Steel
GE 5 E	Open	5 mm	14 mm	6 mm	4 mm	13°	Steel
GE 6 C	Open	6 mm	14 mm	6 mm	4 mm	13°	Steel
GE 6 E	Open	6 mm	14 mm	6 mm	4 mm	13°	Steel
GE 8 C	Open	8 mm	16 mm	8 mm	5 mm	15°	Steel
GE 8 E	Open	8 mm	16 mm	8 mm	5 mm	15°	Steel
GE 10 C	Open	10 mm	19 mm	9 mm	6 mm	12°	Steel
GE 10 E	Open	10 mm	19 mm	9 mm	6 mm	12°	Steel
GEH 10 C	Open	10 mm	22 mm	12 mm	7 mm	18°	Steel
GE 12 C	Open	12 mm	22 mm	10 mm	7 mm	10°	Steel
GE 12 E	Open	12 mm	22 mm	10 mm	7 mm	10°	Steel
GE 12 TXGR	Open	12 mm	22 mm	10 mm	7 mm	10°	Steel
GEG 12 ESA	Open	12 mm	22 mm	12 mm	7 mm	4°	Steel
GEH 12 C	Open	12 mm	26 mm	15 mm	9 mm	18°	Steel
GE 15 C	Open	15 mm	26 mm	12 mm	9 mm	8°	Steel
GE 15 ES	Open	15 mm	26 mm	12 mm	9 mm	8°	Steel
GE 15 ES-2RS	Double-Lip Seals	15 mm	26 mm	12 mm	9 mm	8°	Steel

Page Previous Next