Single Row Cylindrical Roller Bearings With Inner Ring

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part Number	ID	OD	Width	Cage Material	Dynamic Load
NU 2210 ECP	50 mm	90 mm	23 mm	PA66 cage, roller centred	90 kN
NU 2210 ECML	50 mm	90 mm	23 mm	Brass cage, inner or outer ring centred	90 kN
NU 2210 ECM	50 mm	90 mm	23 mm	Brass cage, roller centred	90 kN
NU 2210 ECJ	50 mm	90 mm	23 mm	Steel cage, roller centred	90 kN
NU 210 ECPH	50 mm	90 mm	20 mm	PEEK cage, roller centred	73.5 kN
NU 210 ECP	50 mm	90 mm	20 mm	PA66 cage, roller centred	73.5 kN
NU 210 ECML	50 mm	90 mm	20 mm	Brass cage, inner or outer ring centred	73.5 kN
NU 210 ECM	50 mm	90 mm	20 mm	Brass cage, roller centred	73.5 kN
NU 210 ECJ	50 mm	90 mm	20 mm	Steel cage, roller centred	73.5 kN
NU 1010 ML	50 mm	80 mm	16 mm	Brass cage, inner or outer ring centred	36.5 kN
NU 1010 ECP	50 mm	80 mm	16 mm	PA66 cage, roller centred	53 kN
NJ 310 ECPH	50 mm	110 mm	27 mm	PEEK cage, roller centred	127 kN
NJ 310 ECP	50 mm	110 mm	27 mm	PA66 cage, roller centred	127 kN
NJ 310 ECML	50 mm	110 mm	27 mm	Brass cage, inner or outer ring centred	127 kN
NJ 310 ECM	50 mm	110 mm	27 mm	Brass cage, roller centred	127 kN
NJ 310 ECJ	50 mm	110 mm	27 mm	Steel cage, roller centred	127 kN
NJ 2310 ECPH	50 mm	110 mm	40 mm	PEEK cage, roller centred	186 kN
NJ 2310 ECP	50 mm	110 mm	40 mm	PA66 cage, roller centred	186 kN
NJ 2310 ECML	50 mm	110 mm	40 mm	Brass cage, inner or outer ring centred	186 kN
NJ 2210 ECPH	50 mm	90 mm	23 mm	PEEK cage, roller centred	90 kN
NJ 2210 ECP	50 mm	90 mm	23 mm	PA66 cage, roller centred	90 kN
NJ 2210 ECML	50 mm	90 mm	23 mm	Brass cage, inner or outer ring centred	90 kN
NJ 2210 ECJ	50 mm	90 mm	23 mm	Steel cage, roller centred	90 kN
NJ 210 ECPH	50 mm	90 mm	20 mm	PEEK cage, roller centred	73.5 kN
NJ 210 ECP	50 mm	90 mm	20 mm	PA66 cage, roller centred	73.5 kN
NJ 210 ECML	50 mm	90 mm	20 mm	Brass cage, inner or outer ring centred	73.5 kN
NJ 210 ECM	50 mm	90 mm	20 mm	Brass cage, roller centred	73.5 kN
NJ 210 ECJ	50 mm	90 mm	20 mm	Steel cage, roller centred	73.5 kN
N 310 ECP	50 mm	110 mm	27 mm	PA66 cage, roller centred	127 kN
N 210 ECP	50 mm	90 mm	20 mm	PA66 cage, roller centred	73.5 kN

Page Previous Next