Single Row Cylindrical Roller Bearings With Inner Ring

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part Number	ID	OD	Width	Cage Material	Dynamic Load
NUP 208 ECJ	40 mm	80 mm	18 mm	PA66 cage, roller centred	62 kN
NU 308 ECPH	40 mm	90 mm	23 mm	PEEK cage, roller centred	93 kN
NU 308 ECP	40 mm	90 mm	23 mm	PA66 cage, roller centred	93 kN
NU 308 ECML	40 mm	90 mm	23 mm	Brass cage, inner or outer ring centred	93 kN
NU 308 ECM	40 mm	90 mm	23 mm	Brass cage, roller centred	93 kN
NU 308 ECJ	40 mm	90 mm	23 mm	Steel cage, roller centred	93 kN
NU 2308 ECPH	40 mm	90 mm	33 mm	PEEK cage, roller centred	129 kN
NU 2308 ECP	40 mm	90 mm	33 mm	PA66 cage, roller centred	129 kN
NU 2308 ECML	40 mm	90 mm	33 mm	Brass cage, inner or outer ring centred	129 kN
NU 2308 ECJ	40 mm	90 mm	33 mm	Steel cage, roller centred	129 kN
NU 2208 ECPH	40 mm	80 mm	23 mm	PEEK cage, roller centred	81.5 kN
NU 2208 ECP	40 mm	80 mm	23 mm	PA66 cage, roller centred	81.5 kN
NU 2208 ECML	40 mm	80 mm	23 mm	Brass cage, inner or outer ring centred	81.5 kN
NU 2208 ECJ	40 mm	80 mm	23 mm	Steel cage, roller centred	81.5 kN
NU 208 ECPH	40 mm	80 mm	18 mm	PEEK cage, roller centred	62 kN
NU 208 ECP	40 mm	80 mm	18 mm	PA66 cage, roller centred	62 kN
NU 208 ECML	40 mm	80 mm	18 mm	Brass cage, inner or outer ring centred	62 kN
NU 208 ECM	40 mm	80 mm	18 mm	Brass cage, roller centred	62 kN
NU 208 ECJ	40 mm	80 mm	18 mm	Steel cage, roller centred	62 kN
NU 1008 ML	40 mm	68 mm	15 mm	Brass cage, inner or outer ring centred	28.5 kN
NJ 308 ECPH	40 mm	90 mm	23 mm	PEEK cage, roller centred	93 kN
NJ 308 ECP	40 mm	90 mm	23 mm	PA66 cage, roller centred	93 kN
NJ 308 ECML	40 mm	90 mm	23 mm	Brass cage, inner or outer ring centred	93 kN
NJ 308 ECM	40 mm	90 mm	23 mm	Brass cage, roller centred	93 kN
NJ 308 ECJ	40 mm	90 mm	23 mm	Steel cage, roller centred	93 kN
NJ 2308 ECPH	40 mm	90 mm	33 mm	PEEK cage, roller centred	129 kN
NJ 2308 ECP	40 mm	90 mm	33 mm	PA66 cage, roller centred	129 kN
NJ 2308 ECML	40 mm	90 mm	33 mm	Brass cage, inner or outer ring centred	129 kN
NJ 2308 ECJ	40 mm	90 mm	33 mm	Steel cage, roller centred	129 kN
NJ 2208 ECPH	40 mm	80 mm	23 mm	PEEK cage, roller centred	81.5 kN

Page Previous Next