Single Row Full Complement Cylindrical Roller Bearings

Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.

Part Number	ID	OD	Width	Dynamic Load	Static Load
NCF 3052 CV	260 mm	400 mm	104 mm	1540 kN	2550 kN
NCF 2952 CV	260 mm	360 mm	60 mm	737 kN	1430 kN
NCF 1852 V	260 mm	320 mm	28 mm	270 kN	550 kN
NCF 3048 CV	240 mm	360 mm	92 mm	1140 kN	1960 kN
NCF 2948 CV	240 mm	320 mm	48 mm	583 kN	1140 kN
NCF 3044 CV	220 mm	340 mm	90 mm	1080 kN	1800 kN
NCF 2944 CV	220 mm	300 mm	48 mm	550 kN	1060 kN
NJG 2340 VH	200 mm	420 mm	138 mm	2290 kN	3200 kN
NCF 3040 CV	200 mm	310 mm	82 mm	913 kN	1530 kN
NCF 2940 CV	200 mm	280 mm	48 mm	528 kN	965 kN
NCF 3038 CV	190 mm	290 mm	75 mm	792 kN	1290 kN
NCF 2938 CV	190 mm	260 mm	42 mm	440 kN	780 kN
NCF 3036 CV	180 mm	280 mm	74 mm	781 kN	1250 kN
NCF 2936 CV	180 mm	250 mm	42 mm	391 kN	695 kN
NCF 3034 CV	170 mm	260 mm	67 mm	671 kN	1060 kN
NCF 2934 CV	170 mm	230 mm	36 mm	314 kN	560 kN
NCF 2234 V	170 mm	310 mm	86 mm	1100 kN	1700 kN
NCF 3032 CV	160 mm	240 mm	60 mm	512 kN	800 kN
NCF 2932 CV	160 mm	220 mm	36 mm	303 kN	530 kN
NCF 3030 CV	150 mm	225 mm	56 mm	457 kN	710 kN
NCF 2930 CV	150 mm	210 mm	36 mm	292 kN	490 kN
NCF 3028 CV	140 mm	210 mm	53 mm	440 kN	680 kN
NCF 2928 CV	140 mm	190 mm	30 mm	220 kN	390 kN
NCF 3026 CV	130 mm	200 mm	52 mm	413 kN	620 kN
NCF 2926 CV	130 mm	180 mm	30 mm	205 kN	360 kN
NCF 3024 CV	120 mm	180 mm	46 mm	292 kN	440 kN
NCF 2924 CV	120 mm	165 mm	27 mm	172 kN	290 kN
NCF 2224 V	120 mm	215 mm	58 mm	512 kN	735 kN
NCF 3022 CV	110 mm	170 mm	45 mm	275 kN	400 kN
NCF 2922 CV	110 mm	150 mm	24 mm	134 kN	220 kN

Page Previous Next